From mjr@netcom.com Mon Sep 20 09:11:19 1993 Newsgroups: rec.radio.scanner,alt.radio.scanner From: mjr@netcom.com (Matthew Rapaport) Subject: Re: AOR AR-3000 changing priority channel test time. Organization: Netcom Online Communications Services (408-241-9760 login: guest) Date: Thu, 16 Sep 1993 22:24:58 GMT Lines: 25 In article <1993Sep12.222040.8654@sserve.cc.adfa.oz.au> pgc@csadfa.cs.adfa.oz.au (Phil Clark) writes: >From article , by mjr@netcom.com (Matthew Rapaport): >> Someone once posted the only undocumented command for the AR3000 I've ever >> seen. It involved changing the time interval the scanner uses to check the >> priority channel. Can someone repost this sequence of keystrokes? > > >And could they also say if this is for the AR3000 or the AR3000A. > Someone already replied to me by mail but as I thought, the subject is of more general interest... The secret: press DIAL (get out of memory mode), then 2ndF then HOLD DOWN the PRIO key for 2 seconds. This gives you a display showing the priority test time in seconds. Just change it to what ever you want... then press ENTER. Yes it works on the 3000A, I don't know about the older model... > -- matthew rapaport Philosopher/Programmer At Large KD6KVH mjr@netcom.com 70371.255@compuserve.com